How Do I Reset My Sricam Sp007?

How do I reset my security camera password?

By default, the IP Camera’s administrator password is admin.

And you can change the password on User Management page.

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button..

How do I factory reset my Illustra camera?

1. Press the Default button on the camera and release within 4 seconds to restart the camera. 2. Enter the web-based illustra utility > System > Firmware and press the Factory Default button.

How do I change my WiFi settings on ADT?

If you go into the settings on the control panel (you will need to enter your master code) you should see a wireless networks menu. From here you can choose a new wifi network and connect to it. Simply changing WiFi networks will not cause you to lose everything.

Why won’t my IP camera connect?

Make Sure There Is No Signal Interference. If there is a bad reach, the IP camera can’t find your WiFi signal, and it cannot connect to the WiFi. The IP camera should not be too far from the router. Check the distance between the IP camera and the router.

How do I reset my Sricam?

Find something like a pin to press the Reset button on the camera and hold it for 15 seconds to restore the settings to factory defaults. Afterwards release Reset button, and the camera will be restored to factory defaults after rebooting.

How do I reset my WiFi camera?

You need to reset the cameras by pressing the reset button on the bottom of the cameras for 10 seconds (led red flashing means reset is complete). After resetting the cameras, you need to plug ethernet cable inside the camera’s connectors and connect it to the new router. Delete the cameras in the “Added device.”

How do I connect my Sricam to my computer?

How to watch Sricam IP camera live video on PCInstall Device Viewer software on PC. Download the Sricam IP camera’s official PC CMS software “Device Viewer” from its official website and install it on your PC. … Sign in the program. … Add device. … Set the program and connect to the camera. … Watch live video on the program.

How do I reset my NVR to factory settings?

Press and hold the Reset button (the crescent moon button) located below the Power button for 10+ seconds. The device will take up to 60+ seconds to restore the default configuration and return to the original factory version.

How do I connect my camera to my WiFi network?

How to use Wireless Security Cameras with a WiFi RouterStep 1: Determine the Wifi strength of your wireless network. … Step 2: Power and Configure the Wireless Security Camera for your Network. … Step 3: Access the IP Camera’s Web Interface. … Step 4: Configuring the WiFi Address. … Step 5: Connect to Your Wireless Router.More items…•

How do you reset a Sricam sp012?

Reset the camera Use the pin (involved in the product box) to insert the reset hole for about 10 seconds until you hear a cashier sound.

Where is the reset button on the IP camera?

Press and hold the reset button on the bottom of the camera for several seconds while the power is on.

How do I connect my SriHome camera?

Go to the phone’s Wireless & Networks settings, and connect your phone to the camera’s WiFi Hotspot. another network?” Please select “Cancel”. 1). Run “SriHome” APP, Tap “+” button.

How do I refresh my Icsee camera?

Power on the camera, the red indicator light will lit up. 2. Using a pin to hold on press the reset button for 10 seconds until you hear the voice: Restore factory settings, pls don’t power up.

How do I find my Sricam IP address?

Note: If run Sricam App on your smart phone, the camera’s IP address can be displayed by tap “Settings”then go to “Network Setting”.